Compatible Systems Octal V.35 - 10/100 RIOP Instruction Manual download pdf (Page 83)

ATLAS 800 Series System Manual System Config Menu Descriptions

Primary Timing Source

5. SYSTEM CONFIG MENU DESCRIPTIONS

The SYSTEM CONFIG menu allows you to set up the ATLAS operational configuration. Figure 5 shows the

items included in this menu. Menu options follow.

Figure 5. System Config Menu

Primary Timing Source

Write security: 1; Read security: 5

Selects the primary timing source. You can select either Internal or any port available that is capable of

providing timing. Please refer to the specific module information to determine whether a port can provide

timing for the system.

Backup Timing Source

Write security: 1; Read security: 5

Selects the secondary timing source. You can select either Internal or any port available that is capable of

providing timing. Please refer to the specific module information to determine whether a port can provide

timing for the system. ATLAS 800 Series uses the backup timing source if the primary timing source goes

into alarm. The backup timing source should be different from the primary timing source for the most

reliable operation.

ADLP Address

Write security: 2; Read security: 5

Shows the system ADTRAN Data Link Layer Protocol (ADLP) address for connecting remote devices to

ADTRAN management software. The allowable range is between 2 and 65520. Enter a value not used by

any other ADTRAN units controlled by the management software.

Session Timeout

Write security: 3; Read security: 5

Defines the number of seconds the terminal session must remain idle before the session times out (valid

range 0 to 65535). You can enter zero to deactivate this option (the session will never time out).

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 380 381

No comments

Compatible Systems Octal V.35 - 10/100 RIOP Instruction Manual Page 83